Merge branch 'tell-accountmanager-url-changed' of https://github.com/overte-org/overte into tell-accountmanager-url-changed

BUILD_LINUX.md

@@ -1,75 +1,81 @@
 # Build Linux
 
-*Last Updated on December 1, 2020*
+*Last Updated on January 6, 2022*
 
 Please read the [general build guide](BUILD.md) for information on dependencies required for all platforms. Only Linux specific instructions are found in this file.
 
 You can use the [Vircadia Builder](https://github.com/vircadia/vircadia-builder) to build on Linux more easily. Alternatively, you can follow the manual steps below.
 
-## Ubuntu 16.04/18.04 specific build guide
+## Ubuntu 18.04
-### Ubuntu 16.04 only
+
-Add the following line to *.bash_profile*  
+### Ubuntu 18.04 Server only
-`export QT_QPA_FONTDIR=/usr/share/fonts/truetype/dejavu/`
-### Ubuntu 18.04 server only
 Add the universe repository:  
-_(This is not enabled by default on the server edition)_
+_(This is not enabled by default on the server edition.)_
 ```bash
 sudo add-apt-repository universe
 sudo apt-get update
 ```
-#### Install build tools:
+
+### Install build tools:
 -  First update the repositories:  
 ```bash
 sudo apt-get update -y
 sudo apt-get upgrade -y
 ```
--  git
+
+-  Install git
 ```bash
 sudo apt-get install git -y
 ```
-Verify by git --version  
+Verify git was installed by running `git --version`.
--  g++
+
+-  Install g++
 ```bash
 sudo apt-get install g++ -y
 ```
-Verify by g++ --version  
+Verify g++ was installed by running `g++ --version`.
--  *Ubuntu 18.04* cmake
+
+-  **Ubuntu 18.04** CMake
 ```bash
 sudo apt-get install cmake -y
 ```
-Verify by cmake --version  
+Verify CMake was installed by running `cmake --version`.
-- *Ubuntu 16.04* cmake  
+
-```bash
+### Install build dependencies:
-wget https://cmake.org/files/v3.14/cmake-3.14.2-Linux-x86_64.sh
-sudo sh cmake-3.14.2-Linux-x86_64.sh --prefix=/usr/local --exclude-subdir
-```
-#### Install build dependencies:
 -  OpenSSL:
 ```bash
 sudo apt-get install libssl-dev
 ```
-Verify with `openssl version`  
+Verify OpenSSL was installed by running `openssl version`.
+
 - OpenGL:
 ```bash
 sudo apt-get install libgl1-mesa-dev -y
-sudo ln -s /usr/lib/x86_64-linux-gnu/libGL.so.346.35 /usr/lib/x86_64-linux-gnu/libGL.so.1.2.0
 ```
-- Verify OpenGL:
+Verify OpenGL:
-  - First install mesa-utils with the command `sudo apt install mesa-utils -y`
+  - First install mesa-utils with the command `sudo apt install mesa-utils -y`.
-  - Then run `glxinfo | grep "OpenGL version"`  
+  - Then run `glxinfo | grep "OpenGL version"`.
-#### To compile interface in a server you must install:
+
+
+### Extra dependencies to compile Interface on a server
+
+
+- Install the following:
 ```bash
 sudo apt-get -y install libpulse0 libnss3 libnspr4 libfontconfig1 libxcursor1 libxcomposite1 libxtst6 libxslt1.1
 ```
+
 -  Misc dependencies:
 ```bash
 sudo apt-get install libasound2 libxmu-dev libxi-dev freeglut3-dev libasound2-dev libjack0 libjack-dev libxrandr-dev libudev-dev libssl-dev zlib1g-dev
 ```
+
 -  Install Python 3 and required packages:
 ```bash
 sudo apt-get install python python3 python3-distro
 ```
--  Install node, required to build the jsdoc documentation:
+
+-  Install Node.js as it is required to build the jsdoc documentation:
 ```bash
 sudo apt-get install nodejs
 ```
@@ -81,16 +87,17 @@ Clone this repository:
 git clone https://github.com/vircadia/vircadia.git
 ```
 
-To compile a DEV version checkout the branch you need. To get a list of all tags:
+Then checkout the master branch with:
-```bash
-git fetch -a
-```
-
-Then checkout the main branch with:
 ```bash
 git checkout master
 ```
 
+If you need a different branch, you can get a list of all tags with:
+```bash
+git fetch --tags
+git tag
+```
+
 ### Using a custom Qt build
 
 Qt binaries are only provided for Ubuntu. In order to build on other distributions, a Qt5 install
@@ -104,6 +111,18 @@ The system's Qt can be used, if the development packages are installed, by setti
 also the last version available in the Qt 5 branch. It is expected that Linux distributions will have
 Qt 5.15.2 available for a long time.
 
+### Architecture support
+
+If the build is intended to be packaged for distribution, the `VIRCADIA_CPU_ARCHITECTURE`
+CMake variable needs to be set to an architecture specific value.
+
+By default, it is set to `-march=native -mtune=native`, which yields builds optimized for a particular
+machine, but these builds will not work on machines lacking same CPU instructions.
+
+For packaging, it is recommended to set it to a different value, for example `-msse3`. This will help ensure that the build will run on all reasonably modern CPUs.
+
+Setting `VIRCADIA_CPU_ARCHITECTURE` to an empty string will use the default compiler settings and yield maximum compatibility.
+
 ### Compiling
 
 Create the build directory:
@@ -118,33 +137,34 @@ Prepare makefiles:
 cmake ..
 ```
 
-- If cmake fails with a vcpkg error - delete /tmp/hifi/vcpkg.  
+If cmake fails with a vcpkg error, then delete `~/vircadia-files/vcpkg/`.  
 
-Start compilation of the server and get a cup of coffee:
+#### Server
+
+To compile the Domain server:
 ```bash
 make domain-server assignment-client
 ```
 
-To compile interface:
+*Note: For a server, it is not necessary to compile the Interface.*
+
+#### Interface
+
+To compile the Interface client:
 ```bash
 make interface
 ```
 
-The commands above will compile with a single thread. If you have enough memory,
+The commands above will compile with a single thread. If you have enough memory, you can decrease your build time using the `-j` flag. Since most x64 CPUs support two threads per core, this works out to CPU_COUNT*2. As an example, if you have a 2 core machine, you could use:
-you can decrease your build time using the `-j` flag. Since most x64 CPUs
+```bash
-support two threads per core, this works out to CPU_COUNT*2. As an example, if
-you have a 2 core machine, you could use:
-```
 make -j4 interface
 ```
 
-In a server, it does not make sense to compile interface.
-
 ### Running the software
 
 #### Domain server
 
-Running domain server:
+Running Domain server:
 ```bash
 ./domain-server/domain-server
 ```
@@ -158,24 +178,16 @@ Running assignment client:
 
 #### Interface
 
-Running interface:
+Running Interface:
 ```bash
 ./interface/interface
 ```
 
-Go to localhost in the running interface.
+Go to "localhost" in the running Interface to visit your newly launched Domain server.
 
-#### Notes
+### Notes
 
-If your goal is to set up a development environment, it is desirable to set the
+If your goal is to set up a development environment, it is desirable to set the directory that vcpkg builds into with the `HIFI_VCPKG_BASE` environment variable.
-directory that vcpkg builds into with the `HIFI_VCPKG_BASE` environment variable.
 For example, you might set `HIFI_VCPKG_BASE` to `/home/$USER/vcpkg`.
-By default, vcpkg will build in the system `/tmp` directory.
 
-If build is intended for packaging or creation of AppImage, `VIRCADIA_CPU_ARCHITECTURE`
+By default, vcpkg will build in the `~/vircadia-files/vcpkg/` directory.
-CMake variable needs to be set to architecture specific value.
-It defaults to `-march=native -mtune=native`, which yields builds optimized for particular
-machine, but builds will not work on machines lacking same CPU instructions.
-For packaging and AppImage it is recommended to set it to different value, for example `-msse3`.
-Setting `VIRCADIA_CPU_ARCHITECTURE` to empty string will use default compiler settings and yield
-maximum compatibility.

BUILD_OSX.md

@@ -1,6 +1,6 @@
-# Build MacOS
+# Build macOS
 
-*Last Updated on October 19, 2021*
+*Last Updated on December 1, 2021*
 
 Please read the [general build guide](BUILD.md) for information on dependencies required for all platforms. This will include the necessary environment variables to customize your build. Only macOS specific instructions are found in this document.
 
@@ -21,9 +21,9 @@ brew install cmake openssl npm
 Download an install Python 3.6.6 or higher from [here](https://www.python.org/downloads/).
 Execute the `Update Shell Profile.command` script that is provided with the installer.
 
-### MacOS SDK
+### macOS SDK
 
-You will need version `10.12` of the macOS SDK for building, otherwise you may have crashing or other unintended issues due to the deprecation of OpenGL on macOS. You can get that SDK from [here](https://github.com/phracker/MacOSX-SDKs). You must copy it in to your Xcode SDK directory, e.g.
+You will need version `10.12` of the macOS SDK for building, otherwise you may experience crashing or other unintended issues due to the deprecation of OpenGL on macOS. You can get that SDK from [here](https://github.com/phracker/MacOSX-SDKs). You must copy it in to your Xcode SDK directory, e.g.
 
 ```bash
 cp -rp ~/Downloads/MacOSX10.12.sdk /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/
@@ -64,14 +64,17 @@ You can append `-j4` to assign more threads to build with. The number indicates
 
 To package the installation, you can simply run `make package` afterwards.
 
-## Notes
+## Architecture Support
 
-If build is intended for packaging or creation of AppImage, `VIRCADIA_CPU_ARCHITECTURE`
+If the build is intended to be packaged for distribution, the `VIRCADIA_CPU_ARCHITECTURE`
-CMake variable needs to be set to architecture specific value.
+CMake variable needs to be set to an architecture specific value.
-It defaults to `-march=native -mtune=native`, which yields builds optimized for particular
+
-machine, but builds will not work on machines lacking same CPU instructions.
+By default, it is set to `-march=native -mtune=native`, which yields builds optimized for a particular
-For packaging and AppImage it is recommended to set it to different value, for example `-msse3`.
+machine, but these builds will not work on machines lacking same CPU instructions.
-Setting `VIRCADIA_CPU_ARCHITECTURE` to empty string will use default compiler settings and yield
+
+For packaging, it is recommended to set it to a different value, for example `-msse3`. This will help ensure that the build will run on all reasonably modern CPUs.
+
+Setting `VIRCADIA_CPU_ARCHITECTURE` to an empty string will use the default compiler settings and yield
 maximum compatibility.
 
 ## FAQ

README.md

@@ -54,7 +54,6 @@ Vircadia™ is a 3D social software project seeking to incrementally bring about
 - [For Windows - Interface & Server](https://github.com/vircadia/vircadia/blob/master/INSTALLER.md)
 - [For Mac - Interface](https://github.com/vircadia/vircadia/blob/master/INSTALLER.md#os-x)
 - [For Linux - Server .deb - Vircadia Builder](INSTALLER.md#ubuntu-1804--deb)
-- [For Linux - Server .rpm - Vircadia Builder](INSTALLER.md#amazon-linux-2--rpm)
 - [For Linux - Interface AppImage - Vircadia Builder](https://github.com/vircadia/vircadia-builder/blob/master/README.md#building-appimages)
 
 ### Boot to Metaverse: [The Goal](https://vircadia.com/vision/)
@@ -94,10 +93,8 @@ Keep in mind that Vircadia consists of multiple smaller projects that might have
 
 #### Supporters of the Vircadia Project
 
-| [ksuprynowicz (74hc595)](https://github.com/ksuprynowicz) |
+One (1) anonymous, three (3) total sponsors through GitHub. ❤️
+
+| [Daichi Shimabukuro](https://github.com/mshlomd) |
 | --- |
-| <p align="center">[<img src="https://vircadia.com/wp-content/uploads/2021/07/74hc595_profile_2-1.png" width="80" alt="ksuprynowicz" />](https://github.com/ksuprynowicz)</p>
+| <p align="center">[<img src="https://avatars.githubusercontent.com/u/4787162?v=4" width="80" alt="Daichi Shimabukuro" />](https://github.com/mshlomd)</p>
-
-#### Sponsors of Open Source
-
-<img src="https://vircadia.com/wp-content/uploads/2021/11/CBT_OS-logo_White-V.png" width="250" alt="CrossBrowserTesting" />

hifi_qt.py

@@ -144,12 +144,16 @@ endif()
             if 'x86_64' == cpu_architecture:
                 u_major = int( distro.major_version() )
                 u_minor = int( distro.minor_version() )
+                if distro.id() == 'ubuntu' or distro.id() == 'linuxmint':
                     if (distro.id() == 'ubuntu' and u_major == 18) or distro.id() == 'linuxmint' and u_major == 19:
                         self.qtUrl = self.assets_url + '/dependencies/vcpkg/qt5-install-5.15.2-ubuntu-18.04-amd64.tar.xz'
                     elif (distro.id() == 'ubuntu' and u_major > 18) or (distro.id() == 'linuxmint' and u_major > 19):
                         self.__no_qt_package_error()
                     else:
                         self.__unsupported_error()
+                else:
+                    self.__no_qt_package_error()
+
 
             elif 'aarch64' == cpu_architecture:
                 if distro.id() == 'ubuntu':

interface/src/Util.cpp

@@ -182,7 +182,7 @@ void runTimingTests() {
     const int EXTRA_JUNK_SIZE = 200;
     extraJunk.append((unsigned char)255);
     for (int i = 0; i < EXTRA_JUNK_SIZE; i++) {
-        extraJunk.append(QString("junk"));
+        extraJunk.append(QString("junk").toUtf8());
     }
 
     {
@@ -266,7 +266,7 @@ void runUnitTests() {
         QByteArray codedValueBuffer = codedValue;
 
         codedValueBuffer.append((unsigned char)255);
-        codedValueBuffer.append(QString("junk"));
+        codedValueBuffer.append(QString("junk").toUtf8());
 
         qDebug() << "codedValueBuffer:";
         outputBufferBits((const unsigned char*)codedValueBuffer.constData(), codedValueBuffer.size());

interface/src/commerce/Wallet.cpp

@@ -525,7 +525,7 @@ bool Wallet::readSecurityImage(const QString& inputFilePath, unsigned char** out
         } else {
             foundFooter = (line == IMAGE_FOOTER);
             if (!foundFooter) {
-                base64EncryptedBuffer.append(line);
+                base64EncryptedBuffer.append(line.toUtf8());
             }
         }
     }

libraries/display-plugins/src/display-plugins/OpenGLDisplayPlugin.cpp

@@ -844,7 +844,7 @@ glm::uvec2 OpenGLDisplayPlugin::getSurfacePixels() const {
     uvec2 result;
     auto window = _container->getPrimaryWidget();
     if (window) {
-        result = toGlm(window->geometry().size() * window->devicePixelRatio());
+        result = toGlm(window->geometry().size() * window->devicePixelRatioF());
     }
     return result;
 }

libraries/networking/src/AccountManager.cpp

@@ -573,7 +573,7 @@ void AccountManager::requestAccessToken(const QString& login, const QString& pas
     postData.append("grant_type=password&");
     postData.append("username=" + QUrl::toPercentEncoding(login) + "&");
     postData.append("password=" + QUrl::toPercentEncoding(password) + "&");
-    postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE);
+    postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE.toUtf8());
 
     request.setUrl(grantURL);
     request.setHeader(QNetworkRequest::ContentTypeHeader, "application/x-www-form-urlencoded");
@@ -594,9 +594,9 @@ void AccountManager::requestAccessTokenWithAuthCode(const QString& authCode, con
 
     QByteArray postData;
     postData.append("grant_type=authorization_code&");
-    postData.append("client_id=" + clientId + "&");
+    postData.append("client_id=" + clientId.toUtf8() + "&");
-    postData.append("client_secret=" + clientSecret + "&");
+    postData.append("client_secret=" + clientSecret.toUtf8() + "&");
-    postData.append("code=" + authCode + "&");
+    postData.append("code=" + authCode.toUtf8() + "&");
     postData.append("redirect_uri=" + QUrl::toPercentEncoding(redirectUri));
 
     request.setUrl(grantURL);
@@ -618,7 +618,7 @@ void AccountManager::requestAccessTokenWithSteam(QByteArray authSessionTicket) {
     QByteArray postData;
     postData.append("grant_type=password&");
     postData.append("steam_auth_ticket=" + QUrl::toPercentEncoding(authSessionTicket) + "&");
-    postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE);
+    postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE.toUtf8());
 
     request.setUrl(grantURL);
     request.setHeader(QNetworkRequest::ContentTypeHeader, "application/x-www-form-urlencoded");
@@ -639,9 +639,9 @@ void AccountManager::requestAccessTokenWithOculus(const QString& nonce, const QS
 
     QByteArray postData;
     postData.append("grant_type=password&");
-    postData.append("oculus_nonce=" + nonce + "&");
+    postData.append("oculus_nonce=" + nonce.toUtf8() + "&");
-    postData.append("oculus_id=" + oculusID + "&");
+    postData.append("oculus_id=" + oculusID.toUtf8() + "&");
-    postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE);
+    postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE.toUtf8());
 
     request.setUrl(grantURL);
     request.setHeader(QNetworkRequest::ContentTypeHeader, "application/x-www-form-urlencoded");
@@ -671,7 +671,7 @@ void AccountManager::refreshAccessToken() {
         QByteArray postData;
         postData.append("grant_type=refresh_token&");
         postData.append("refresh_token=" + QUrl::toPercentEncoding(_accountInfo.getAccessToken().refreshToken) + "&");
-        postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE);
+        postData.append("scope=" + ACCOUNT_MANAGER_REQUESTED_SCOPE.toUtf8());
 
         request.setUrl(grantURL);
         request.setHeader(QNetworkRequest::ContentTypeHeader, "application/x-www-form-urlencoded");

libraries/networking/src/DomainAccountManager.cpp

@@ -92,7 +92,7 @@ void DomainAccountManager::requestAccessToken(const QString& username, const QSt
     formData.append("grant_type=password&");
     formData.append("username=" + QUrl::toPercentEncoding(username) + "&");
     formData.append("password=" + QUrl::toPercentEncoding(password) + "&");
-    formData.append("client_id=" + _currentAuth.clientID);
+    formData.append("client_id=" + _currentAuth.clientID.toUtf8());
 
     request.setUrl(_currentAuth.authURL);
 

libraries/networking/src/UserActivityLogger.cpp

@@ -52,7 +52,7 @@ void UserActivityLogger::logAction(QString action, QJsonObject details, JSONCall
     // Adding the action name
     QHttpPart actionPart;
     actionPart.setHeader(QNetworkRequest::ContentDispositionHeader, "form-data; name=\"action_name\"");
-    actionPart.setBody(QByteArray().append(action));
+    actionPart.setBody(QByteArray().append(action.toUtf8()));
     multipart->append(actionPart);
 
     // Log the local-time that this event was logged

libraries/octree/src/OctreeDataUtils.cpp

@@ -63,11 +63,11 @@ bool OctreeUtils::RawOctreeData::readOctreeDataInfoFromFile(QString path) {
 QByteArray OctreeUtils::RawOctreeData::toByteArray() {
     QByteArray jsonString;
 
-    jsonString += QString("{\n  \"DataVersion\": %1,\n").arg(dataVersion);
+    jsonString += QString("{\n  \"DataVersion\": %1,\n").arg(dataVersion).toUtf8();
 
     writeSubclassData(jsonString);
 
-    jsonString += QString(",\n  \"Id\": \"%1\",\n  \"Version\": %2\n}").arg(id.toString()).arg(version);
+    jsonString += QString(",\n  \"Id\": \"%1\",\n  \"Version\": %2\n}").arg(id.toString()).arg(version).toUtf8();
 
     return jsonString;
 }

libraries/ui/src/OffscreenUi.cpp

@@ -284,7 +284,7 @@ QQuickItem* OffscreenUi::createMessageBox(Icon icon, const QString& title, const
     map.insert("buttons", buttons.operator int());
     map.insert("defaultButton", defaultButton);
     QVariant result;
-    bool invokeResult;
+    bool invokeResult = false;
     auto tabletScriptingInterface = DependencyManager::get<TabletScriptingInterface>();
     TabletProxy* tablet = dynamic_cast<TabletProxy*>(tabletScriptingInterface->getTablet("com.highfidelity.interface.tablet.system"));
     if (tablet->getToolbarMode() && _desktop) {
@@ -580,7 +580,7 @@ QQuickItem* OffscreenUi::createInputDialog(const Icon icon, const QString& title
     auto tabletScriptingInterface = DependencyManager::get<TabletScriptingInterface>();
     TabletProxy* tablet = dynamic_cast<TabletProxy*>(tabletScriptingInterface->getTablet("com.highfidelity.interface.tablet.system"));
 
-    bool invokeResult;
+    bool invokeResult = false;
     if (tablet->getToolbarMode() && _desktop) {
         invokeResult = QMetaObject::invokeMethod(_desktop, "inputDialog",
                                                  Q_RETURN_ARG(QVariant, result),
@@ -608,7 +608,7 @@ QQuickItem* OffscreenUi::createCustomInputDialog(const Icon icon, const QString&
     auto tabletScriptingInterface = DependencyManager::get<TabletScriptingInterface>();
     TabletProxy* tablet = dynamic_cast<TabletProxy*>(tabletScriptingInterface->getTablet("com.highfidelity.interface.tablet.system"));
 
-    bool invokeResult;
+    bool invokeResult = false;
     if (tablet->getToolbarMode() && _desktop) {
         invokeResult = QMetaObject::invokeMethod(_desktop, "inputDialog",
                                                  Q_RETURN_ARG(QVariant, result),
@@ -754,7 +754,7 @@ private slots:
 
 QString OffscreenUi::fileDialog(const QVariantMap& properties) {
     QVariant buildDialogResult;
-    bool invokeResult;
+    bool invokeResult = false;
     auto tabletScriptingInterface = DependencyManager::get<TabletScriptingInterface>();
     TabletProxy* tablet = dynamic_cast<TabletProxy*>(tabletScriptingInterface->getTablet("com.highfidelity.interface.tablet.system"));
     if (tablet->getToolbarMode() && _desktop) {
@@ -783,7 +783,7 @@ QString OffscreenUi::fileDialog(const QVariantMap& properties) {
 
 ModalDialogListener* OffscreenUi::fileDialogAsync(const QVariantMap& properties) {
     QVariant buildDialogResult;
-    bool invokeResult;
+    bool invokeResult = false;
     auto tabletScriptingInterface = DependencyManager::get<TabletScriptingInterface>();
     TabletProxy* tablet = dynamic_cast<TabletProxy*>(tabletScriptingInterface->getTablet("com.highfidelity.interface.tablet.system"));
     if (tablet->getToolbarMode() && _desktop) {
@@ -1003,7 +1003,7 @@ class AssetDialogListener : public ModalDialogListener {
 QString OffscreenUi::assetDialog(const QVariantMap& properties) {
     // ATP equivalent of fileDialog().
     QVariant buildDialogResult;
-    bool invokeResult;
+    bool invokeResult = false;
     auto tabletScriptingInterface = DependencyManager::get<TabletScriptingInterface>();
     TabletProxy* tablet = dynamic_cast<TabletProxy*>(tabletScriptingInterface->getTablet("com.highfidelity.interface.tablet.system"));
     if (tablet->getToolbarMode() && _desktop) {
@@ -1033,7 +1033,7 @@ QString OffscreenUi::assetDialog(const QVariantMap& properties) {
 ModalDialogListener *OffscreenUi::assetDialogAsync(const QVariantMap& properties) {
     // ATP equivalent of fileDialog().
     QVariant buildDialogResult;
-    bool invokeResult;
+    bool invokeResult = false;
     auto tabletScriptingInterface = DependencyManager::get<TabletScriptingInterface>();
     TabletProxy* tablet = dynamic_cast<TabletProxy*>(tabletScriptingInterface->getTablet("com.highfidelity.interface.tablet.system"));
     if (tablet->getToolbarMode() && _desktop) {
@@ -1175,10 +1175,6 @@ bool OffscreenUi::eventFilter(QObject* originalDestination, QEvent* event) {
     return result;
 }
 
-unsigned int OffscreenUi::getMenuUserDataId() const {
-    return _vrMenu->_userDataId;
-}
-
 ModalDialogListener::ModalDialogListener(QQuickItem *dialog) : _dialog(dialog) {
     if (!dialog) {
         _finished = true;

libraries/ui/src/OffscreenUi.h

@@ -237,7 +237,6 @@ public:
     static ModalDialogListener* getTextAsync(const Icon icon, const QString & title, const QString & label, const QString & text = QString());
     static ModalDialogListener* getItemAsync(const Icon icon, const QString & title, const QString & label, const QStringList & items, int current = 0, bool editable = true);
 
-    unsigned int getMenuUserDataId() const;
     QList<QObject *> &getModalDialogListeners();
 
 signals:

libraries/ui/src/VrMenu.cpp

@@ -17,25 +17,15 @@
 #include "OffscreenUi.h"
 #include "ui/Logging.h"
 
-static unsigned int USER_DATA_ID = 0;
 
-// Binds together a Qt Action or Menu with the QML Menu or MenuItem
+
-//
+MenuUserData::MenuUserData(QAction* action, QObject* qmlObject, QObject* qmlParent) {
-// TODO On reflection, it may be pointless to use the UUID.  Perhaps
-// simply creating the bidirectional link pointing to both the widget
-// and qml object and inject the pointer into both objects
-class MenuUserData : public QObjectUserData {
-public:
-    MenuUserData(QAction* action, QObject* qmlObject, QObject* qmlParent) {
-        if (!USER_DATA_ID) {
-            USER_DATA_ID = DependencyManager::get<OffscreenUi>()->getMenuUserDataId();
-        }
     _action = action;
     _qml = qmlObject;
     _qmlParent = qmlParent;
 
-        action->setUserData(USER_DATA_ID, this);
+    action->setProperty(USER_DATA, QVariant::fromValue(this));
-        qmlObject->setUserData(USER_DATA_ID, this);
+    qmlObject->setProperty(USER_DATA, QVariant::fromValue(this));
     qmlObject->setObjectName(uuid.toString());
     // Make sure we can find it again in the future
     updateQmlItemFromAction();
@@ -59,8 +49,7 @@ public:
         virtual bool eventFilter(QObject* o, QEvent* e) override {
             if (e->type() == QEvent::DynamicPropertyChange) {
                 QDynamicPropertyChangeEvent* dpc = static_cast<QDynamicPropertyChangeEvent*>(e);
-                    if (dpc->propertyName() == "exclusionGroup")
+                if (dpc->propertyName() == "exclusionGroup") {
-                    {
                     // unfortunately Qt doesn't support passing dynamic properties between C++ / QML, so we have to use this ugly helper function
                     QMetaObject::invokeMethod(_qmlParent,
                         "addExclusionGroup",
@@ -80,16 +69,16 @@ public:
     };
 
     new ExclusionGroupSetter(action, qmlObject, qmlParent);
-    }
+}
 
-    ~MenuUserData() {
+MenuUserData::~MenuUserData() {
     QObject::disconnect(_changedConnection);
     QObject::disconnect(_shutdownConnection);
-        _action->setUserData(USER_DATA_ID, nullptr);
+    _action->setProperty(USER_DATA, QVariant());
-        _qml->setUserData(USER_DATA_ID, nullptr);
+    _qml->setProperty(USER_DATA, QVariant());
-    }
+}
 
-    void updateQmlItemFromAction() {
+void MenuUserData::updateQmlItemFromAction() {
     _qml->setProperty("checkable", _action->isCheckable());
     _qml->setProperty("enabled", _action->isEnabled());
     QString text = _action->text();
@@ -97,9 +86,9 @@ public:
     _qml->setProperty("shortcut", _action->shortcut().toString());
     _qml->setProperty("checked", _action->isChecked());
     _qml->setProperty("visible", _action->isVisible());
-    }
+}
 
-    void clear() {
+void MenuUserData::clear() {
     _qml->setProperty("checkable", 0);
     _qml->setProperty("enabled", 0);
     _qml->setProperty("text", 0);
@@ -107,27 +96,26 @@ public:
     _qml->setProperty("checked", 0);
     _qml->setProperty("visible", 0);
 
-        _action->setUserData(USER_DATA_ID, nullptr);
+    _action->setProperty(USER_DATA, QVariant());
-        _qml->setUserData(USER_DATA_ID, nullptr);
+    _qml->setProperty(USER_DATA, QVariant());
-    }
+}
 
 
-    const QUuid uuid{ QUuid::createUuid() };
 
-    static bool hasData(QAction* object) {
+bool MenuUserData::hasData(QAction* object) {
     if (!object) {
         qWarning() << "Attempted to fetch MenuUserData for null object";
         return false;
     }
-        return (nullptr != static_cast<MenuUserData*>(object->userData(USER_DATA_ID)));
+    return (nullptr != object->property(USER_DATA).value<MenuUserData*>());
-    }
+}
 
-    static MenuUserData* forObject(QAction* object) {
+MenuUserData* MenuUserData::forObject(QAction* object) {
     if (!object) {
         qWarning() << "Attempted to fetch MenuUserData for null object";
         return nullptr;
     }
-        auto result = static_cast<MenuUserData*>(object->userData(USER_DATA_ID));
+    auto result = object->property(USER_DATA).value<MenuUserData*>();
     if (!result) {
         qWarning() << "Unable to find MenuUserData for object " << object;
         if (auto action = dynamic_cast<QAction*>(object)) {
@@ -138,18 +126,7 @@ public:
         return nullptr;
     }
     return result;
-    }
+}
-
-private:
-    Q_DISABLE_COPY(MenuUserData);
-
-    QMetaObject::Connection _shutdownConnection;
-    QMetaObject::Connection _changedConnection;
-    QAction* _action { nullptr };
-    QObject* _qml { nullptr };
-    QObject* _qmlParent{ nullptr };
-};
-
 
 VrMenu::VrMenu(OffscreenUi* parent) : QObject(parent) {
     _rootMenu = parent->getRootItem()->findChild<QObject*>("rootMenu");

libraries/ui/src/VrMenu.h

@@ -18,8 +18,44 @@
 #include <QSignalMapper>
 #include <QAction>
 #include <QMenu>
+#include <QUuid>
 #include "OffscreenUi.h"
 
+
+
+// Binds together a Qt Action or Menu with the QML Menu or MenuItem
+//
+// TODO On reflection, it may be pointless to use the UUID.  Perhaps
+// simply creating the bidirectional link pointing to both the widget
+// and qml object and inject the pointer into both objects
+class MenuUserData : public QObject {
+    Q_OBJECT
+public:
+    MenuUserData(QAction* action, QObject* qmlObject, QObject* qmlParent);
+    ~MenuUserData();
+    void updateQmlItemFromAction();
+    void clear();
+
+    const QUuid uuid{ QUuid::createUuid() };
+
+    static bool hasData(QAction* object);
+
+    static MenuUserData* forObject(QAction* object);
+
+private:
+    Q_DISABLE_COPY(MenuUserData);
+
+    static constexpr const char *USER_DATA{"user_data"};
+
+    QMetaObject::Connection _shutdownConnection;
+    QMetaObject::Connection _changedConnection;
+    QAction* _action { nullptr };
+    QObject* _qml { nullptr };
+    QObject* _qmlParent{ nullptr };
+};
+
+
+
 // FIXME break up the rendering code (VrMenu) and the code for mirroring a Widget based menu in QML
 class VrMenu : public QObject {
     Q_OBJECT
@@ -37,7 +73,6 @@ protected:
 
     friend class MenuUserData;
     friend class OffscreenUi;
-    const unsigned int _userDataId { QObject::registerUserData() };
 };
 
 #endif // hifi_VrMenu_h

scripts/system/inventory/package-lock.json

@@ -6488,9 +6488,9 @@
       }
     },
     "follow-redirects": {
-      "version": "1.12.1",
+      "version": "1.14.7",
-      "resolved": "https://registry.npmjs.org/follow-redirects/-/follow-redirects-1.12.1.tgz",
+      "resolved": "https://registry.npmjs.org/follow-redirects/-/follow-redirects-1.14.7.tgz",
-      "integrity": "sha512-tmRv0AVuR7ZyouUHLeNSiO6pqulF7dYa3s19c6t+wz9LD69/uSzdMxJ2S91nTI9U3rt/IldxpzMOFejp6f0hjg==",
+      "integrity": "sha512-+hbxoLbFMbRKDwohX8GkTataGqO6Jb7jGwpAlwgy2bIz25XtRm7KEzJM76R1WiNT5SwZkX4Y75SwBolkpmE7iQ==",
       "dev": true
     },
     "for-in": {
@@ -10662,9 +10662,9 @@
       "dev": true
     },
     "shelljs": {
-      "version": "0.8.4",
+      "version": "0.8.5",
-      "resolved": "https://registry.npmjs.org/shelljs/-/shelljs-0.8.4.tgz",
+      "resolved": "https://registry.npmjs.org/shelljs/-/shelljs-0.8.5.tgz",
-      "integrity": "sha512-7gk3UZ9kOfPLIAbslLzyWeGiEqx9e3rxwZM0KE6EL8GlGwjym9Mrlx5/p33bWTu9YG6vcS4MBxYZDHYr5lr8BQ==",
+      "integrity": "sha512-TiwcRcrkhHvbrZbnRcFYMLl30Dfov3HKqzp5tO5b4pt6G/SezKcYhmDg15zXVBswHmctSAQKznqNW2LO5tTDow==",
       "dev": true,
       "requires": {
         "glob": "^7.0.0",